Autonics BUP S Series Installation - Page 3

Parcourez en ligne ou téléchargez le pdf Installation pour {nom_de_la_catégorie} Autonics BUP S Series. Autonics BUP S Series 3 pages. 1-channel u-shaped photoelectric sensors

Imprimer la page

Specifications

Model

BUP-□-□

Sensing type

Through-beam

Sensing distance

30 mm

50 mm

Sensing target

Opaque materials

Min. sensing target

≥ Ø 4 mm

Response time

≤ 1 ms

Light source

Infrared

Peak emission

940 nm

wavelength

Sensitivity adjustment Fixed

Operation mode

Light ON mode - Dark ON mode selectable (Control wire)

Indicator

Operation indicator (red), power indicator (green)

Approval

ᜢ ᜫ

Unit weight

≈ 85 g

≈ 115 g

(packaged)

(≈ 120 g)

(≈ 160 g)

Power supply

12-24 VDCᜡ ±10 % (ripple P-P: ≤ 10%)

Current consumption

≤ 30 mA

Control output

NPN open collector output / PNP open collector output model

Load voltage

≤ 30 VDCᜡ

Load current

≤ 200 mA

Residual voltage

NPN: ≤ 1 VDCᜡ, PNP: ≤ 2.5 VDCᜡ

Reverse power protection circuit, output short overcurrent protection

Protection circuit

circuit

Insulation resistance

≥ 20 MΩ (500 VDCᜡ megger)

±240 VDCᜡ the square wave noise (pulse width: 1 ㎲) by the noise

Noise immunity

simulator

Dielectric strength

1,000 VACᜠ 50/60 Hz for 1 min

1.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y,

Vibration

Z direction for 2 hours

Shock

500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times

Ambient illuminance

Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx

(receiver)

Fixed sensitivity model: -25 to 65 ℃, storage: -25 to 70 ℃

(no freezing or condensation)

Ambient temperature

Sensitivity adjustable model: -10 to 60 ℃, storage: -25 to 70 ℃

(no freezing or condensation)

Ambient humidity

35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)

Fixed sensitivity model: IP66 (IEC standard)

Protection rating

Sensitivity adjustable model: IP50 (IEC standard)

Connection

Cable type, cable connector type

Cable type: Ø 4 mm, 4-wire, 2 m

Cable spec.

Cable connector type: Ø 4 mm, 4-wire, 0.5 m

Wire spec.

AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm

Connector

5-pin socket type

Material

Case: ABS, CAP: PC

BUP-□-E

BUP-□S-□

30 mm

50 mm

30 mm

50 mm

≥ Ø 1.5 mm

YES (Adjuster)

ᜢ

ᜢ ᜫ

≈ 60 g

≈ 90 g

≈ 85 g

≈ 115 g

(≈ 95 g)

(≈ 125 g)

(≈ 120 g)

(≈ 160 g)

18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002