909 DEC008SC Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 DEC008SC. 909 DEC008SC 12 pages. 250w multi-purpose scraper with assorted blades
Imprimer la page4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
The correct power tool will
Properly
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety rules for electric scrapers
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
•
Fully unwind cable drum extensions to avoid potential
overheating.
•
When an extension cable is required, you must ensure it
has the right ampere rating for your power tool and is in a
safe electrical condition.
•
Ensure your mains supply voltage is the same as your
tool rating plate voltage.
•
Your tool is double insulated for additional protection
against a possible electrical insulation failure within
the tool.
•
Always check walls, floors and ceilings to avoid hidden
power cables, fasteners and pipes.
•
After long working periods external metal parts and
accessories could be hot.
•
Do not force the scraper; let the tool do the work
at a reasonable speed. Overloading will occur if too
much pressure is applied and the motor slows resulting
in inefficient scraping and possible damage to the
tool's motor.
•
Take special care to guard against harmful and toxic
dusts when scraping lead-based painted surfaces,
woods and metals, including the following:
– All persons entering the work area must wear a
mask specially designed for protection against toxic
dust and fumes such as those arising from the sanding
of lead paint
5
This