Galaxie HairJet Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Galaxie HairJet. Galaxie HairJet 2 pages.

Imprimer la page

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following.

Read all instructions before using this appliance.

WARNING

- To reduce the risk of fi re, electric shock, or injury:

1. Do not leave appliance when plugged in. Unplug

from outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow to be used as a toy. Close attention

is necessary when used by or near children or

infi rm persons. This appliance is not intended for

use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been

given supervision or instruction concerning the

use of the appliance by a person responsible for

their safety.

4. Use only as described in this manual. Use only

manufacturer's recommended attachments.

5. Do not use with damaged cord or plug. If appliance

is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water,

return it to a service center.

6.Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp

edges or corners. Keep cord away from heated

surfaces.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction

or break down, grounding provides a path of least resistance

for electric current to reduce the risk of electric shock. This

appliance is equipped with a cord having an equipment-

grounding conductor and grounding plug. The plug must be

inserted into an appropriate

outlet that is properly

installed and grounded in

accordance with all local

codes and ordinances. No

adaptor should be used with

this appliance.

fi gure 1

7. Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any objects into openings. Do not use

with any opening blocked; keep free of dust, lint,

hair, and anything that may reduce air fl ow.

10.Keep hair, loose clothing, fi ngers, and all parts of

body away from openings and moving parts.

11.Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or hot ashes.

12.Do not use without dust bag and/or fi lters in place.

13.Turn off all controls before unplugging.

14.Use extra care when cleaning on stairs.

15.Do not use to pick up fl ammable or combustible

liquids such as gasoline or use in areas where they

may be present.

16.Connect to a properly grounded outlet only. See

Grounding Instructions.

WARNING

Improper connection of the equipment-grounding conductor

can result in a risk of electric shock. Check with a qualifi ed

electrician or service person if you are in doubt as to

whether the outlet is properly grounded. Do not modify the

plug provided with the appliance – if it will not fi t the outlet

have a proper outlet installed by a qualifi ed electrician.

This appliance is for use on a nominal 120 V circuit, and has

a grounded plug (fi gure 1). Make sure that the appliance is

connected to an outlet having the same confi guration as the

plug. No adaptor should be used with this appliance.

SCHEMATIC – HAIR JET

1. Circuit Breaker

2. Serial Number

3. Automatic Dustpan

4. Integrated Inlet

OPERATING INSTRUCTIONS

Place Hair Jet on a smooth, dry, level surface in close

proximity to a 120v electrical outlet.

Plug unit into outlet, and sweep debris to the front of the

automatic dustpan. To activate the dustpan, lift up on the

dustpan fl ange with your toe (fi gure 2-A). To shut unit off,

push down on the right side of the dustpan until it clicks in

place (fi gure 2-B).

fi gure 2

To activate the system for use as a central vacuum system,

lift up on integrated inlet door and insert hose. Unit will

automatically turn on. To shut unit off, unplug the hose.

Note:

If you are unable to store the Hair Jet against a wall, you

may want to use the rubber pads for added stability. Place a

rubber pad on the bottom of each rear corner of the Hair Jet

base. Do not use the rubber pads at the front of the unit.

HOSE HOOK-UP & INLETS

If using an On-Off hose...

To start your Hair Jet, simply insert

the hose in the vacuum inlet of your

choice. Please ensure that the tab

on the hose end is properly lined

up with the slot in the inlet

opening (fi gure 3). If your

hose handle has an integrated

on-off switch, simply slide the

switch to the "on" position.

MAINTENANCE

Change the bag when the one in place is full. Frequency will

depend on the use of the unit.

1. To access the bag, lift and remove the unit's top cover.

2. Remove the used bag and seal bag opening (adhesive seal

provided on each bag). Discard used bag.

3. Install the new bag, ensuring the tabs on the bag adaptor

are aligned with the slots in the bag collar (fi gure 4).

Part Number :

TDSAC43G

retention

ring

tabs on bag

adaptator

fi gure 4

4. Ensure adequate sealing by inserting bag as far as the

retention ring (fi gure 4-A). Rotate bag 20° (fi gure 4-B)

to ensure tabs on bag adaptor are no longer aligned with

the slots in the bag collar.

5. Replace the unit's top cover.

The disc-shaped fi lter

(fi gure 6), located between the

dust bag and the motor, should

be changed once for every three

bags, or more often as needed.

fi gure 5

fi gure 3