909 HG2000 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 HG2000. 909 HG2000 14 pages. 2000w heat gun

Power interruption

When using the heat gun, and the mains power is

interrupted, the heat gun will stop. When the power is

reinstated the heat gun settings will resume to the previous

temperature and air flow settings. HOWEVER, the heatgun

will not actually start until one of the 4 buttons under the

display has been pressed.

If the slide selector switch has been previously moved to

the off position when the power was interrupted, then the

selector switch will need to be moved back to the desired

temperature range and the heat gun started.

Intended use

When observing the safety rules and using the original

accessories, this hot air tool is intended for all applications

with hot air that are listed in these operating instructions.

•

Shrinking of shrink-down tubing, solder connectors and

solder terminals, packaging and electrical components.

•

Deforming of articles made from acrylic, PVC, and

polystyrene, tubing, plates and profiles, as well as

moist woods.

•

Welding of thermoplastic polymer, flooring materials

of PVC and linoleum, PVC-coated fabric, tarpaulins

and foils.

•

Soldering of tin, special silver solder, SMD elements,

cable lugs, and for loosening soldered connections.

•

Removal of old and even thick coatings of oil paint,

varnish and synthetic plaster.

•

Drying of colour shade samples, filler, adhesives,

construction joints and stucco forms.

•

Joining adhesives - Large-surface gluing with contact

adhesives, activation of pressure-sensitive adhesives,

acceleration of bonding processes, releasing of bonding

points as well as releasing or bonding of edge band or

veneer.

• Defrosting of icy stairs and steps, door locks, boot

lids, car doors or water pipes, as well as for defrosting

refrigerators and freezers.