909 ID182 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 909 ID182. 909 ID182 20 pages. 18v impact driver/ wrench 9.5mm (3/8") socket drive 6.35mm (1/4") drive adaptor lithium-ion

Imprimer la page

•

After the battery has reached the end of its useful life,

we recommend recycling the materials at your local

municipal council recycling centre. DO NOT attempt to

replace the battery cells in the battery pack, repair or

modify any part of the battery pack assembly.

•

When recycling, make it non conductive by applying

insulating tape to the terminals located on the battery.

When to charge the battery

New batteries are shipped in a low charged condition and

should be fully charged before Use.

The battery pack can be recharged at any time during use,

provided the pack is not overheated.

If the battery pack starts to cut out due to low voltage, or

previous tasks undertaken can no longer be performed, it is

suggested to stop using the tool and recharge the battery.

For storage, it is suggested to recharge the battery between

50% and 75% charge. 1 hour using the fast 1 hour charger

after the battery pack has been used and charged a few

times.

Unpacking

Due to modern mass production techniques, it is unlikely

that your 909 Power Tool is faulty or that a part is missing.

If you find anything wrong, do not operate the tool until the

parts have been replaced or the fault has been rectified.

Failure to do so could result in serious personal injury.