Galaxy 79060702900 Manuel d'utilisation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Galaxy 79060702900. Galaxy 79060702900 14 pages.

Imprimer la page

Before You Call

Solutions to Common Problems

Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that

are not the result of defective workmanship or materials in this appliance.

OCCURRENCE

Range is not level.

Cannot move appliance

easily.

Appliance must be accessible

for

service.

Surface

element too

hot or not hot

enough.

Surface element does not heat.

POSSIBLE

CAUSE/SOLUTION

Poor installation. Place oven rack in center of oven. Place a level on the oven rack.

Adjust leveling legs at base of range until the oven rack is level.

Be sure floor is level and is strong and stable enough to adequately support range.

If floor is sagging or sloping, contact a carpenter to correct the situation.

Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are

square and have sufficient room for range clearance.

Cabinets not square or are built in too tightly. Contact builder or installer to make

appliance accessible.

Carpet interferes with range. Provide sufficient space so range can be lifted over

carpet.

Incorrect control setting. Make sure the correct control is on for the surface

element to be used.

Lightweight or warped pans used. Use only flat, evenly balanced, medium or

heavyweight

cookware.

Flat pans heat better than warped pans. Cookware

materials and weight of the material affect heating. Heavy- and medium-weight

pans heat evenly. Because lightweight pans heat unevenly, foods may burn easily.

No power to the appliance.

Check steps under "Entire Appliance

Does Not

Operate" in this Before You Call Checklist.

Incorrect control setting. Make sure the correct control is on for the surface

element to be used.

Entire appliance

does not operate.

Element not making contact in block. Follow instructions under "Surface Elements

and Drip Bowls" in the Care & Cleaning section.

Make sure cord/plug is plugged tightly into outlet.

Oven

smokes

broiling.

The time of day must first be set in order to operate the oven (some models).

Service wiring is not complete. Contact your authorized Sears Service Center for

assistance.

excessively

during

Control(s) not set properly. Follow instructions under Setting Oven Controls.

Make sure oven door is opened to broil stop position.

Meat too close to the element. Reposition the rack to provide proper clearance

between the meat and the element. Preheat broil element for searing.