Galaxy Audio ANY SPOT Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Galaxy Audio ANY SPOT. Galaxy Audio ANY SPOT 12 pages. Dual channel system uhf
Également pour Galaxy Audio ANY SPOT : Manuel de l'utilisateur (12 pages), Manuel de l'utilisateur (20 pages)
Imprimer la page
Functions of the ECDR Receiver
Functions of the ECDR Receiver
Front Panel
1
MIN
MAX
1
Audio Output Level Control
2
Channel display
3
AF Signal LED
Rear Panel
System Setup
Receiver Programming
Channel Selection: Press the
(0-9, then A-F).* Press the
transmitter's (HH38 or MBP38) IR window towards and in close proximity less than 1.5 ft. to the
ECD receiver's
synchronization has been established. Only one IR connection can be established at a time
during each syncing process.
*Note: If the RF light on the receiver is on when the transmitter is off, change to another channel.
Receiver volume control:
Rotate the audio output level control knob to the left to reduce the output level, rotate to the right
to increase the output level.
2
2
3
4
AF
RF
SELECT
ASC
6
7
1
1
Power Adapter Jack.
"SELECT" button to increase the
6
ASC button, and the Channel Display will begin to flash. Hold the
7
IR window. The ECD receiver's
5
5
3
4
2
AF
RF
SELECT
ASC
7
6
4
RF signal LED
5
Infrared IR Window
6
Channel select button
7
Automatic Synchronization Control (ASC)
button
2
2
¼" Audio Output (mixed).
RF Signal LED will light once
4
1
MIN
MAX
channel number by one
2