Galaxy Audio Any Spot DHT-QUAD Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Galaxy Audio Any Spot DHT-QUAD. Galaxy Audio Any Spot DHT-QUAD 12 pages.
Également pour Galaxy Audio Any Spot DHT-QUAD : Manuel de l'utilisateur (12 pages)
Imprimer la page
System
Frequency Range: 655 - 679 MHZ
:
Transmitter Output level
Band: UHF
Operating Range Under Typical Conditions:
Note: actual range depends on RF signal
absorption, reflection, and interference.
Audio Frequency Response: (+/-3dB)
60Hz~16KHz
Total Harmonic Distortion (+/-30KHz deviation£¬
1KHz tone): <1%
Dynamic Range: >90dB A-weighted
Operating Temperature Range:
14ºF to 122ºF (-10º C to +50º C)
Note: battery characteristics may limit
this range:
Bodypack Transmitter:
Max Audio Input Level:
0 dBV maximum at mic gain position.
+10 dBV maximum at 0 dB gain position.
+20 dBV maximum at 10 dB gain position.
Gain Adjustment Range: 30dB
Input Impedance: 470K
Dimensions: 3.5" x 2.6" x 1"
(89mm H x 65mm W x 24mm D)
Weight: 3.0oz (85 g) (without batteries)
Power Requirements:
2 "AA"
Batteries
alkaline or rechargeable
batteries
Battery Life:
About 6 hours
10 dBm
300'
Handheld Transmitter:
Max Audio input level:
Dimensions: 9.5" x 2.1" dia. (242mm x 54mm dia.)
Weight: 10.6oz (300 g) (without batteries)
Power Requirements: 2 "AA" size
alkaline or rechargeable batteries
Battery Life: About 6 hours
Receiver:
Audio Output Level: (+/-30KHz deviation, 1KHz tone)
XLR connector (into 600 Ohms load) -12dBV
¼" connector (into 3KOhms load) -18dBV
Output Impedance: XLR connector 200Ohms
¼" connector 1KOhms
XLR output: Impedance balanced
Pin1£ºGround (cable shield)
Pin2£ºAudio
Pin3£ºNo Audio
Sensitivity: -93dBm for 30dB
Image Rejection: >60dB
Dimensions: 1.7" x 16.1" x 11"
(45mm H x 410mm W x 280mm D)
Weight: 7.3lbs (3300 g)
Power Requirements:
12-18 V dc at 1000 mA, supplied by external
power supply.
0dBV