Galaxy Audio BE HEARD ECM Démarrage rapide

Parcourez en ligne ou téléchargez le pdf Démarrage rapide pour {nom_de_la_catégorie} Galaxy Audio BE HEARD ECM. Galaxy Audio BE HEARD ECM 2 pages.

Imprimer la page
Galaxy Audio BE HEARD ECM Démarrage rapide
GAL A X Y AUDIO
Wireless Microphone System
Included Components
1.
1.
ECM Receiver x1
2.
1/4" Cable x1
3.
Power Supply x1
4.
Quick Start Guide x1
2.
Setup
1
Insert the 5.5 mm plug into the DC
input jack, then plug the wall wart into a
120VAC outlet.
3
To sync the handheld mic transmitter,
make sure to power on first. For the body
pack, power on and then press the ASC
button.
6
When the transmitter is synced, the RF
presence indicator will illuminate. When
talking into the microphone the AF
presence indicator will illuminate.
4.
GAL A X Y AUDIO
Wireless Microphone System
Included Components
1.
ECM Receiver x1
2.
1/4" Cable x1
3.
Power Supply x1
4.
Quick Start Guide x1
Setup
1
Insert the 5.5 mm plug into the DC
input jack, then plug the wall wart into a
120VAC outlet.
3
To sync the handheld mic transmitter,
make sure to power on first. For the body
pack, power on and then press the ASC
button.
3.
6
When the transmitter is synced, the RF
presence indicator will illuminate. When
talking into the microphone the AF
presence indicator will illuminate.
2
XLR Output: Connect a shielded
microphone cable to the receiver's AF
XLRM output, then connect the other
end into your mixer input.
4
Then press ASC on the receiver.
7
Use the level control to adjust the
volume. This will affect both the XLR
and 1/4" outputs.
For detailed instructions for finding the best frequencies, please consult the online manual.
Optional Accessories
1.
Q uick Start Guide
ECM
Optional Accessories
1.
4.
1.
1.
Wireless Microphone System
GALAX Y AUDIO
Included Components
ECM Receiver x1
1.
1.
4.
HH52 Handheld Mic
1.
Optional Accessories
1.
Quick Start Guide
ECM
HH52 Handheld Mic
Quick Start Guide x1
2.
1/4" Cable x1
Power Supply x1
4.
3.
2.
3.
LV-U3BK Lav Mic
2.
HS-U3BK Headset Mic
3.
AS-GTR Guitar Cable
5.
4.
MBP52 Body Pack
2.
3.
5.
4.
2.
MBP52 Body Pack
2.
Setup
1
2
3
Operation
1
2
3.
HS-U3BK Headset Mic
Insert the 5.5 mm plug into the DC
input jack, then plug the wall wart into a
120VAC outlet.
XLRM output, then connect the other
microphone cable to the receiver's AF
XLR Output: Connect a shielded
end into your mixer input.
1/4" output, then connect the other
end into your system input.
1/4" Output: Connect 1 end of a shielded
1/4"M to 1/4"M cable to the receiver's
(Powers on immediately when power
Make sure the receiver is powered on.
supply is plugged into the DC input jack)
Press the "Select" button on the receiver
to choose a frequency number of 1-16.
4.
LV-U3BK Lav Mic
2.
3.
4.
3
To sync the handheld mic transmitter,
4
Then press ASC on the receiver.
5
Place the chosen transmitter with it's IR
Transmitter IR Window Locations:
5a
Receiver IR Window Location:
5b
5.
AS-GTR Guitar Cable
2.
3.
6
pack, power on and then press the ASC
make sure to power on first. For the body
button.
7
5
about 6" away.
window facing the receiver IR window,
6
compartment. Body Pack IR is located
on the backside bottom corner.
Handheld IR is located inside the battery
Center of the receiver face
presence indicator will illuminate. When
presence indicator will illuminate.
When the transmitter is synced, the RF
talking into the microphone the AF
Use the level control to adjust the
volume. This will affect both the XLR
and 1/4" outputs.
Place the chosen transmitter with it's IR
window facing the receiver IR window,
about 6" away.
normally needs no adjustment. However,
The Mute Level is factory set and
you may turn clockwise if interference is
present.
For detailed instructions for finding the best frequencies, please consult the online manual.
5.
Operation
3.
2
3
1
2
XLR Output: Connect a shielded
1/4" Output: Connect 1 end of a shielded
Make sure the receiver is powered on.
Press the "Select" button on the receiver
microphone cable to the receiver's AF
1/4"M to 1/4"M cable to the receiver's
(Powers on immediately when power
to choose a frequency number of 1-16.
XLRM output, then connect the other
1/4" output, then connect the other
supply is plugged into the DC input jack)
4.
end into your mixer input.
end into your system input.
4
5
5a
5b
5.
Then press ASC on the receiver.
Place the chosen transmitter with it's IR
Transmitter IR Window Locations:
Receiver IR Window Location:
window facing the receiver IR window,
Handheld IR is located inside the battery
Center of the receiver face
about 6" away.
compartment. Body Pack IR is located
on the backside bottom corner.
7
8
Use the level control to adjust the
The Mute Level is factory set and
volume. This will affect both the XLR
normally needs no adjustment. However,
and 1/4" outputs.
you may turn clockwise if interference is
present.
For detailed instructions for finding the best frequencies, please consult the online manual.
3
1/4" Output: Connect 1 end of a shielded
1/4"M to 1/4"M cable to the receiver's
1/4" output, then connect the other
end into your system input.
5
Place the chosen transmitter with it's IR
window facing the receiver IR window,
about 6" away.
8
The Mute Level is factory set and
normally needs no adjustment. However,
you may turn clockwise if interference is
present.
1.
HH52 Handheld Mic
MBP52 Body Pack
HS-U3BK Headset Mic
2.
LV-U3BK Lav Mic
AS-GTR Guitar Cable
Operation
1
Make sure the receiver is powered on.
(Powers on immediately when power
supply is plugged into the DC input jack)
5a
Transmitter IR Window Locations:
Handheld IR is located inside the battery
compartment. Body Pack IR is located
on the backside bottom corner.
Quick Start Guide
ECM
3.
4.
5.
2
Press the "Select" button on the receiver
to choose a frequency number of 1-16.
5b
Receiver IR Window Location:
Center of the receiver face