Galaxy Audio DHXR4 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Galaxy Audio DHXR4. Galaxy Audio DHXR4 20 pages. Any spot wireless microphone system
Également pour Galaxy Audio DHXR4 : Manuel de démarrage rapide (2 pages)

Galaxy Audio DHXR4 Manuel de l'utilisateur

Setting Up Multiple Receivers

Setting Up Multiple Receivers
Using the auto scan function to find clear frequencies for your
DHX or DHXR4 System
2
AF LEVEL
®
-30
-20
-12
-6
®
®
UHF Four Channel
Diversity Wireless Receiver
POWER
POWER
3
1) Power on any pre-existing wireless systems and transmitters (excluding DHXR/DHXR4).
2) Power on the DHXR/DHXR4 Receiver, do not turn on the DHXR/DHXR4 transmitters.
3) On the DHXR or the first channel of the DHXR4, press the SET button until scan flashes,
then press either the up or down button. The receiver will then scan for an open frequency
channel within the group selected, and stop on the frequency.
When the DHXR4 Receiver has been set to a clear frequency, use the ADS/ASC feature to
sync the receiver frequency to the transmitter.
4) Power on the transmitter for the DHXR or the first channel of the DHXR4, and sync it to the
receiver using the ADS/ASC feature. Turn the transmitter on and aim its IR window towards
the IR SYNC window at the left side of the DHXR/DHXR4, then press the ADS/ASC button
on the desired receiver channel, and the transmitter will automatically set to the receiver's
frequency.
5) For using more channels on the DHXR4, leave the first channel transmitter on and repeat
steps 3 and 4 for the second DHXR4 channel.
6) Continue this process for the 3rd and 4th channel of the DHXR4.
7) If the receiver is unable to find open frequencies on the group selected, you will need to set
one or more receiver channels to another group, and then scan again.
8) To change the group, press the SET button twice, the group number will begin to flash. Use
the up or down button to select another group. Then proceed as before.
9) If you have more than one DHXR or DHXR4 system, continue the process as described,
adding one channel at a time.
If you have more DHXR or DHXR4 systems to tune follow the same procedure on each
one, always leaving the previous system transmitter on.
12
3
AF LEVEL
SET
SET
-3
0
3 dBu
-30
-20
-12
-6
-3
0
3 dBu
ADS
ADS
4
AF LEVEL
AF LEVEL
SET
-30
-20
-12
-6
-3
0
3 dBu
-30
-20
-12
-6
-3
0
3 dBu
ADS
SET
ADS
3
4
3
2