Autonics PSAN-L01CA Series Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Autonics PSAN-L01CA Series. Autonics PSAN-L01CA Series 13 pages. Small size, 1/2,000 resolution connector type digital pressure sensor
Également pour Autonics PSAN-L01CA Series : Manuel (2 pages)

Imprimer la page

PSAN Series

Installation

1. Pressure port is divided as basic and option speciﬁ cation.

Therefore, be sure that to use commercially available

one touch ﬁ tting. (Standard: R(PT)1/8", Option: NPT1/8",

7/16"-20UNF)

2. Please connect it by using spanner(12mm, 17mm) at

the metal part in order not to overload on the body when

connecting one touch ﬁ tting.

12mm

Spanner

Caution

The tightening torque of one touch fitting should be

max.100kgf . cm. If not, it may cause mechanical problem.

3.Two different fixing brackets are provided for PSAN

model. Select proper one with considering your

application environments.

4. At first, please unscrew hexagon wrench bolt and

assemble the bracket on this unit by ﬁ xing hexagon the

wrenchbolt.

Caution

In this case, tightening torque of hexagon wrench should

be max. 30kgf . cm. If not, it may cause mechanical problem.

5. Bracket(PSO-B02) and front protection cover (PSO- P01)

are sold separately. Please see the pictures for installation.

Protection

cover

(PSO-P01)

E-16

17mm

Spanner

Spring washer

Hexagon wrench bolt

(M3x6)

Panel mounting bracket

(PSO-B02)

Body

(PSAN)

Bracket panel

Proper usage

Caution

PSAN Series is for sensing of non corrosive gas.

Do not use this product at corrosive gas or ﬂ ammable

gas, etc.

• Please using this unit within the range of specification, if

applying pressure is larger than specification, it may not

be working properly due to damage.

• After supplying power, it takes 3 sec. to work.

• When using switching mode power supply, frame ground

(F.G.) terminal of power supply should be grounded.

Switching

mode

Power

F.G.

Supply

• It may cause malfunction by noise, when wiring with

power line or high voltage line.

• Do not insert any sharp or pointed object into pressure

port. It may cause mechanical problem due to sensor

damage.

• Do not use this unit with flammable gas, because this is

not an explosion proof structure.

• Be sure that this unit should not be contacted directly with

water, oil, thinner, etc.

• Wiring must be done with power off.

Ground