Autonics LE365S-41 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Autonics LE365S-41. Autonics LE365S-41 12 pages. W48×h48mm, weekly/yearly timer
Également pour Autonics LE365S-41 : Montage (11 pages)

Imprimer la page

LE365S-41

• Set range for ON/OFF time width

: 1min to 12 hour 59min

• One record in 3 steps (ON day/ON time, OFF day/OFF

time, ON time width/OFF time width)

OFF width

ON Time

● Weekly pulse mode

Output turns ON at ON time for a specified pulse width.

(Pulse width: 1 to 59sec, 1 to 60min)

• One record in two steps (ON day/ON time, pulse width)

(1 to 59sec, 1 to 60min)

● Yearly ON/OFF mode

Output turns ON at ON time on START date and turns OFF

at OFF time on STOP date.

• One Record in three Steps (START/STOP date, ON/OFF

time)

● Yearly pulse mode

Output turns ON at ON time on START date and turns

OFF at OFF time on STOP time for a specified pulse width

repeatedly.

• One record in three steps (START/STOP date, ON time,

Pulse width)

Program operation

Weekly setting 1 of Program 1

Weekly setting 2 of Program

Yearly setting 1 of Program

Output operation

● ① to ②: Operated by weekly setting 1 of Program 1.

● ② to ③: Operated by weekly setting 2 of Program 1.

● ④ to ⑤: Operated by weekly setting 1 of Program 1.

● ⑤ to ⑥: Operated by yearly setting 1 of Program 1.

(during weekly program operation at 12:00 AM on START

date, the weekly program operation stops, and it changes

to yearly program operation mode. The yearly program

operation stops at 12:00 AM on the next day of STOP

date.)

Display and change of next mode

● The day of next mode in Program is displayed on the day

indicator, and the time of next mode is displayed on the

lower row of screen.

● In ON/OFF operation mode, set ON time and OFF time

to next mode. In Pulse operation mode, set Pulse ON

time to next mode.

K-92

ON width

OFF Time

Pulse width

ON time

①

② ③ ④ ⑤

Power restore mode

In setting group 2 - LEVEL2 ( RET turns ON, AT or NOR

flashes), select Auto[ AT ] or Normal [ NOR ] by

and press

key to set.

SET

● Auto [ AT ] power restore mode

Output operates according to program when power turns

ON again after power failure.

●Normal[ NOR ] power restore mode

When power turns ON again after power failure, output

is kept OFF and rIN flashes on the lower row of screen

and power restore input (press

RUN mode) is applied, rIN turns OFF and output

operates according to program.

Season switching mode

This feature uses for setting seasonal weekly operation

mode. To operate this mode, save starting month and date,

ending month and date of each season which displays S1,

S2, S3, S4 then set day and time of each season in weekly

program setting. It is also able to operate only in summer

and winter season. (S1: set summer season, S2: set winter

season, S3/S4: do not set)

In setting group 2-Level 2 ( SEN turns ON, OFF flashes.),

select ON[ ON ] by

When the season switching mode changed from OFF

to ON or vice versa, previous set programs are deleted.

● ON[ ON ] mode

Weekly program is switched automatically by season

switching.

• Period setting per season

① Press

key in period setting per season mode of

SET

setting group 2. ( SEN flashes, season with preset period

turns ON and START and STOP turn ON.)

② Advance to the flashing position of season selection

among S1, S2, S3, S4 by

key.

③ After set START month, date per season and press

key.

④

key is pressed after set STOP month, date per

SET

season, it is advanced to LEVEL1 of period setting per

season. Add or adjust the period setting by

● It is disable to use when it is OFF [ OFF ].

⑥

● If season terms are overlapped, these are prioritized in

S4>S3>S2>S1 order.

key over 3 secin

SET

key and press

key to save.

SET

key and press

SET

key

SET

key.