DC Matic TL-900 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DC Matic TL-900. DC Matic TL-900 5 pages. 24-30 vdc powered 3/4 inch drive impact wrench system

Imprimer la page

Input Power Connector

The Control Box that is part of your

Model TL-900

is equipped with an Anderson Connector that is rated

for 175 amps of current. Before connecting your

Model TL-900

make certain that this connector is free

debris and in good condition.

Impacting Mechanism

Your

Model TL-900

is equipped with the highest quality, twin-hammer impacting mechanism (shown in

Fig. 1) It is factory lubricated and sealed so it is not necessary to service it in the field.

Do-It–Yourself Motor Brush Set Replacement

Your

Model TL-900

is equipped with (4) external brush ports that will allow you to quickly and

easily replace your initial set without having to remove the 24 VDC motor from the tool's plastic housing.

Each brush can be removed and replaced by using a standard flat-blade screw driver in minutes (shown

in Fig. 2).

Repairs

To achieve the highest degree of user safety and tool reliability, all repairs

(excluding brush set

replacement)

to your

Model TL-900

must be performed by an authorized repair location. Please contact

DC-Matic Enterprises, Inc. for immediate support of your

Model TL-900

and for proper product return

(RMA) instructions or to purchase a replacement brush set.

Returns

Each returned product must first be issued a RMA (returned merchandise authorization) by DC-Matic

Enterprises, Inc. Do not ship your tool back without a company issued return authorization

(RMA). To request an RMA call toll-free 1-(866)-419-5602

Note: Returned units must be shipped transportation prepaid to DC-Matic's designated repair facility

noted on the RMA.

Warranty

DC-Matic Enterprises will repair or replace, without charge, any portion of your

Model TL-900

tool

if a defect or failure was proved to be caused by faulty material or workmanship for a period of

ONE FULL YEAR from the date of purchase. Proof of purchase date is required for all

warranty claims. Warranty DOES NOT provide repair or replacement if it is determined that any

portion of the tool system failed due to abuse or when repairs were made or attempted by any

one other than "authorized" repair facility personnel. Please take the time to register your Model

900 using the mail-in Warranty Registration Card included in this packet or register the tool

online at www.dcmatic.com

Note: Each

Model TL-900

has a manufacturer's ID plate with serial number affixed to the bottom

of the tool's Control Box ( shown in Fig. 4) for Warranty Verification purposes.