Galaxy Equipment 177IMBL7 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Galaxy Equipment 177IMBL7. Galaxy Equipment 177IMBL7 7 pages. Immersion blenders

Imprimer la page

Safety Warnings & Information

WARNING:

In order to limit accidents such as electric shocks or personal injury, and in order to limit

material damage due to misuse of the appliance, please read these instructions carefully and follow them

strictly. Reading the operating instructions will help you get to know your appliance and enable you to use

the equipment correctly, Please read these instructions in their entirety and make sure that anyone else who

may use the appliance also reads them beforehand.

UNPACKING & HANDLING

• WARNING: Always take care when handling the blades as they are extremely sharp

INSTALLATION

• We recommend that you install your appliance on its wall frame.

CONNECTION

• Always check that your mains supply corresponds to that indicated on the identification plate on the motor unit

and that it can withstand the amperage.

• Never plug your appliance into the mains supply before placing it inside the preparation bowl.

USAGE

• Never try to override the safety systems.

• Never insert an object into the preparation.

• Never switch the appliance on unless it has been placed in the preparation bowl.

• Before dismantling the foot, bell, or whisk always check that the power cord is unplugged.

• The appliance should be tilted at a slight angle to prevent the bell from touching the bottom of the container.

WARNING

IF THE IMMERSION BLENDER IS ACCIDENTALLY FULLY IMMERSED DURING USE

1. DO NOT touch either the blender, the bowl, or the work surface.

2. Unplug the blender's power cord from the wall socket.

3. Remove the immersion blender.

4. Tilt the immersion blender to drain off as much liquid as possible.

5. DO NOT switch the power mixer back on, as there is still a risk of electrocution.

6. Send the power mixer to the approved after-sales service to have the electrical components cleaned and dried.

CLEANING

• As a precaution, always unplug your appliance before cleaning it.

• Always clean the appliance and its attachments at the end of each cycle.

• Never immerse the motor unit in water.

• For parts made from aluminum, use cleaning fluids intended for aluminum.

• For plastic parts, do not use detergents that are too alkaline (e.g. containing too much caustic soda or ammonia).

MAINTENANCE

• Before opening the motor housing it is absolutely vital to unplug the appliance.

• Check the seals and washers regularly and ensure that the safety devices are in good working order.

• It is particularly important to maintain and check the attachments since certain ingredients contain corrosive agents,

e.g. citric acid.

• Never operate the appliance if the power cord or plug has been damaged or if the appliance fails to work properly or

has been damaged in any way.

• Do not hesitate to contact your local maintenance service if something appears to be wrong.

User Manual