Galaxy Equipment 177IMBL9 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Galaxy Equipment 177IMBL9. Galaxy Equipment 177IMBL9 7 pages. Immersion blenders

Imprimer la page

Operation

1. Ensure that the power button is not pressed and keep hand clear.

2. Plug the power cord into a 120V wall socket.

3. Insert the blade into the food to begin preparation.

4. Press and hold the power button to start the blender.

5. Release the power button to stop the blender.

6. The variable speed dial at the top of the handle can be manipulated to increase or decrease

the speed of the blender.

The variable speed setting is self-regulating.

The selected speed will remain the same even if the consistency of your mixture changes.

8. It's recommended to start at a slower speed and increase as you blend.

Working Position

1. Hold the immersion blender in one hand and steady the container with the other.

2. Keep the blender tilted slightly so that the bell does not touch the bottom of the container.

3. Always make sure that the bell is completely submerged to avoid splashing.

4. Always make sure that the air vents of the motor unit do not come into contact with any liquid.

5. It's recommended to move the blender around in the preparation to get a homogenous mixture.

Assembly

ATTACHING THE SHAFT TO THE MOTOR UNIT

1. Check that the appliance is not plugged in.

2. Insert the threaded section of the shaft into the housing of the motor unit.

3. Turn the shaft until it is locked into place moderatly tightly.

REMOVING THE SHAFT FROM THE MOTOR UNIT

1. Check that the appliance is not plugged in.

2. Turn the shaft in the opposite direction until it is completely unscrewed.

REMOVING THE BLADE

1. Remove the shaft completely from the motor unit using steps above.

2. Use an oven glove or thick cloth to grip the blades.

3. Use a hexagonal wrench to unscrew the bolt.

4. Pull the blade out of the housing.

User Manual