activTek DUCTWORX Manuel du propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} activTek DUCTWORX. activTek DUCTWORX 16 pages.

Imprimer la page
METAL DUCTWORK INSTALLATION
5
5. Remove backing from mounting plate adhesive
gasket.
7
7. Secure the mounting plate using (8) #8 self-tapping
screws.
9
9. Secure the unit to the mounting plate with (4)
#8-32 nuts.
(CONTINUED)
6
6. Center openings and press mounting plate onto
duct. The adhesive gasket will hold the mounting
plate in place.
8
8. Insert unit into opening. Be sure the air will pass
though the ActivePure
10
10. Plug unit into working power receptacle.
Hard wiring unit into HVAC system should be done
by a licensed HVAC installer or electrical contractor
only.
cell honeycomb matrix.
®
7