dynarex 10326 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} dynarex 10326. dynarex 10326 4 pages.

3. Insert the legs with the small rubber tip on the other side of

the chair. Depress the brass push-pin and insert the leg

into the socket until the brass push-pin "snaps" through the

hole. (Figure 2)

Figure 2

4. Turn the transfer bench upright.

5. Insert the armrest into the side of the bench with the

suction cup legs. Make sure the arm arches outwards.

Ensure that the brass push-pin "snaps" through the hole.

(Figure 3)

Figure 3

6. Insert the back rest support poles to the chair back. Ensure

that the brass push-pin "snaps" through the hole. (Figure 4)

Figure 4

7. Depress the brass push-pin and insert the back rest

support pole into the support bracket. The support poles

should go through two sets of brackets on each side. The

back rest can be placed on either side of the chair. Ensure

brass push-pin "snap" through the holes in the support

bracket. (Figure 5)

Figure 5