dynarex DynaRide 10220 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} dynarex DynaRide 10220. dynarex DynaRide 10220 6 pages.

Imprimer la page

Reassemble fork and wheel by tightening nuts until no play

remains, but wheels roll freely. If nut is too loose, caster will

shimmy, if too tight, chair will be hard to steer.

REMOVAL OF SWING-AWAY

FOOTRESTS/LEG RESTS

Release lock by pushing on

the front rigging lever.

Swing foot rest/leg rest out

and sideways.

Lift to remove.

ADJUSTING LENGTH OF

FOOTREST/LEG REST

When adjusting length of

footrests or leg rests, user

should be sitting in wheelchair

with feet on the foot plates.

Loosen cam lock lever around

support assembly and push the

release button. Raise or lower

foot plate to desired position that

will provide maximum support of

thighs. Ensure release button is

fully engaged, tighten cam lock lever. Front rigging should

not be so low that it causes uncomfortable pressure to

thighs at front of seat upholstery.

ADJUSTING/ELEVATING LEG REST

Lift foot plate on leg rest assembly

to desired position. Release leg rest

assembly and it will automatically

lock into place. To lower, push the

release lever and lower foot plate

to desired position.

GENERAL CARE

cloth at least once a week. All metal parts can be cleaned

with auto wax or similar products. If exposed to moisture,

dry immediately. Do not use an abrasive cleanser that will

scratch the finish.

REMOVABLE ARMS

button and lifting arms out of front and rear sockets.

Wipe chrome parts with a clean, soft

Remove arms by depressing spring

Hinge

Pins

Adjustment

Holes

Cam Lock

Lever

Release Lever

Front Rigging

Release Lever

Front Rigging

Assembly

Footplate

Hinge

Plates

Front Rigging

Support

Release

Button

Footplate

Assembly

Hinge

Plate