High End Systems Universal Controller Addendum au manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Addendum au manuel de l'utilisateur pour {nom_de_la_catégorie} High End Systems Universal Controller. High End Systems Universal Controller 12 pages.

Imprimer la page

Setting the Control Number

A control number is required only for master dim.

Page 6

Power ON the controller or press the

below:

Press the

<Menu>

button, then use the arrow keys around the

menu option (it will blink).

Press the Adjust 1

arrow key. This displays a list of menu options which will be

<Down>

different depending on whether Show Control or Channel Control has been previously saved.

Do one of the following:

•

If Contnum is one of the displayed options, use the arrow keys around the

to select Contnum (it will blink). Then see Step 5.

•

If Contnum is not displayed, use the arrow keys around the

Control menu option if it is not already blinking. Then see Step 4.

Press the Adjust 1

arrow key. This displays two options: Show Control and Channel

<Down>

Control. Press the Adjust 1

press

. This will save your selection and return you to the Main menu. Start with

Step 2.

Press the Adjust 1

<Down>

Use the Adjust 1 arrow keys to select the control number you wish to use (from 0 to 63), then

press

. The control number does not need to be unique for this controller.

button to return to the Main menu, shown

DIM

READY

PAGE

001

arrow key to select Channel Control (it will blink). Then

<Down>

arrow key. This displays the following menu:

MIDI CONTROL NUM

xxx

Addendum UN-1

<Menu>

button to select the MIDI

<Menu>

button

<Menu>

button to select the