DC-Digital DC-25TZ-3 Instructions pour l'utilisation et l'installation
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'installation pour {nom_de_la_catégorie} DC-Digital DC-25TZ-3. DC-Digital DC-25TZ-3 4 pages.
Imprimer la pageInstructions for operating and installing the
DC-25TZ-3 time zone clock.
Description:
The DC-25TZ-3 is a world time zone time of day clock, with 3 displays - each
display is 4 digit 2.3" red LED proudly made in the USA.
Power:
12VDC @ 700mA (supply included) – requires 100-240VAC 50/60Hz 500mA
Timing: Crystal oscillator controlled (factory calibrated) ± 2 minutes / year.
Mounting: Wall mountable via adjustable teardrop mounting tabs on the back.
Viewing Distance: Viewable up to 100ft.
Enclosure: The all aluminum enclosure has a black textured finger print resistant
powder coat finish and is 7.75 inches high x 31.75 inches wide x 2.25 inches deep.
Weight: Approximately 7.5 lbs.
Controls: Top mounted switches:
12 /24 hour display toggle switch
Set Hour and Set Minute for the master clock (12mm sealed switch)
Set Hour and Set Minute-Tens offset for each secondary zone (12mm sealed
switch)
Battery Backup: Rechargeable 9 Volt battery backup time keeping (included).
The unit is shipped with the 9V battery disconnected from the unit. You
will need to connect the battery before use.
(the displayed captions are for example; your captions may differ)
1 |
P a g e