DCA S1P-FF03-180 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DCA S1P-FF03-180. DCA S1P-FF03-180 8 pages.

Imprimer la page
20. Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less likely to bind and are
easier to control.
21. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tools operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
22. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool, may become
hazardous when used on another tool.
Service
23. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a
risk of injury.
24. When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual.
unauthorized parts or failure to follow Maintenance instructions may create a
risk of electric shock or injury.
VOLTAGE WARNING:
Before connecting the tool to a power source (receptacle, outlet, etc.), be sure the
voltage supplied is the same as that specified on the nameplate of the tool. A
power source with voltage greater than that specified for the tool can result in
SERIOUS INJURY to the user, as well as damage to the tool. If in doubt, DO NOT
PLUG IN THE TOOL. Using a power source with voltage less than nameplate
rating is harmful to the motor.
Use of
-3-

SPECIFICATIONS

Rated Power Input
Rated Speed
External dia.
Wheel Size
Internal dia.
Net Weight
※ Due to the continuing program of research and development, the specifications
herein are subject to change without prior notice.

ADDITIONAL SAFETY RULES

1.
Hold the tool firmly and keep hands away from rotating parts.
2.
When sanding metal surfaces, watch out for flying sparks. Hold the tool so that
sparks fly away from you and other persons or flammable materials.
3.
Do not leave the tool running. Operate the tool only when hand-held.
4.
NEVER use tool with wood cutting blades or other sawblades. Such blades
when used on a polisher frequently kick and cause loss of control leading to
personal injury.
5.
NEVER mount a grinding wheel and attempt to use this tool as a disc grinder.
6.
When use tool outside, be sure to use waterproofed extension cord intended for
outdoor use and use an earth-leakage circuit breaker (30mA) if wok area is too hot
and wet or poisoned by electric dust.
7.
Always use auxiliary handle.
8.
Check the backing pad carefully for cracks, damage or deformity before
operation. Replace cracked, damaged or deformed pad immediately.
9.
Do not work with materials containing asbestos.
10.
This tool has not been waterproofed, so do not use water on the workpiece
surface.
1020 W
1000-3600 r/min
180 mm
22 mm
3.6 kg
-4-