Dynascan L88 Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dynascan L88. Dynascan L88 10 pages. Pmr-446 handportable transceiver
Imprimer la page
Operating temperature range:
Power supply:
Duty cycle:
9.1.- CHANNELS AND FREQUENCIES TABLE:
10.- TROUBLESHOOTING:
If you have problems with the operation of your transceiver, follow the instructions in the following
table.
Problem
The transceiver does not
turn on when operating the
[ON/OFF/Vol] knob.
Battery power dies shortly
after charging.
Cannot communicate with
other members in your
group.
Other communications are
listened on the channel.
Once carried out these previous checking's, if it continues having problems with the
transceiver, consult with the Authorized Technical Service.
-20 ºC to +40 ºC.
7.4 V Li-Ion battery pack.
100 %.
Channel (CH)
1
2
3
4
5
6
7
8
- The battery pack is discharged. Charge the battery pack.
- The battery pack life is finished. Replace the battery pack for a
new one of the same characteristics as that supplied with this
transceiver.
- The battery pack was not installed correctly. Remove and install
again.
- The battery life is finished. Replace the battery pack for a new one
of the same characteristics as that supplied with this transceiver.
- Make sure that you use the same channel and the same tone or
code as the other members of your user group.
- It is very far from the other members of its user group. Make sure
you are within the coverage range of other users.
- Change the "CTCSS" tone or "DCS" code of all transceivers in
your users group.
Frequency (MHz)
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
Cause/Possible solution
English - 10 -