DCB SE-6600 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DCB SE-6600. DCB SE-6600 4 pages. Serial encrypter

The SE-6600 Front Page screen should appear as in Figure 2:

Figure 2 – SE-6600 Front Page Screen

4: Click on Cipher Config from the menu. Select the radio button for "Block Mode Clear" and

enter a Passphrase (e.g. "abc123"), as shown in Figure 3 below.

Figure 3 – SE-6600 Cipher Config Screen, Showing Entries Prior to Save

To make these changes active on SE-6600 A, click the Save button. A Server Status Message

screen will appear to notify of the saved changes.

Note: The passphrase will no longer display,

but it has been saved.

5: Disconnect the LAN cable from SE-6600 A. In a command terminal on the PC (run as

Administrator), clear the ARP cache entry for 192.168.1.1 by using the command arp -d

192.168.1.1. (Alternatively, PC B's LAN connection could be used to configure the second SE-

6600, as long as its IP address is set to the same LAN subnet described in Step 2.)