DCB XT-3305 Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DCB XT-3305. DCB XT-3305 4 pages. Encrypted ethernet tunnel

Imprimer la page

(The Client Password is entered in the Server Mode Settings portion of the page when XT-3305

A is configured as a Server: The values in the Client Mode Settings fields are ignored in this

case.)

To make these changes active on XT-3305 A, click the Store&Activate button near the bottom

of the screen. Wait a few seconds to make sure the changes have been applied.

8: Open the second box and apply power to the XT (XT-3305 "B") to be configured as the Client

unit.

If there is a second PC (PC "B") available, use it to configure this unit. If only one PC is

available, then before plugging the ethernet cable into this second unit, reboot the PC

or open a Command Window (as Administrator) and type the command arp -d

192.168.0.1, which should clear the ARP Cache and guarantee that there will not be an

address conflict.

9: Repeat steps 4 and 5 to access the Quick Startup screen.

10: Configure the IP addresses for LAN1 (trusted) and LAN2 (untrusted) and click Static-

Configuration for LAN2 as shown in Figure 6 below. All other parameters can stay at the

default values.

Figure 5 – Ethernet Tunnel Settings for XT-3305 "A"

Figure 6 – LAN Settings for XT-3305 "B"