high pointe 50F11 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} high pointe 50F11. high pointe 50F11 4 pages.

Imprimer la page
WARNING ! TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
Never leave surface units unattended at high settings. Boil overs cause smoking and
A)
greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
Always turn hood ON when cooking at high heat or when cooking flambéing food. (i.e.
B)
Crepes Suzette, cherries Jubilee, Peppercorn Beef Flambé).
Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or
C)
filter.
Use proper pan size. Always use cookware appropriate for the size of the surface element.
D)
WARNING ! TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A
RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:
SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the
A)
burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPARTMENT.
NEVER PICK UP A FLAMING PAN! - You may be burned.
B)
DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will
C)
result.
Use an extinguisher only if:
D)
You know you have a class ABC extinguisher, and you already know how to operate it.
1.
The fire is small and contained in the area where it started.
2.
The fire department is being called.
3.
You can fight the fire with your back to an exit.
4.
Based on 'Kitchen Fire Safety Tips' published by the NFPA.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS, OBSERVE THE FOLLOWING:
Use this unit only in the manner intended by the manufacturer. If you have questions,
a)
contact the manufacturer.
Before servicing or cleaning unit, switch power off at the service panel and lock service
b)
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
Before operating rangehood, make sure exterior wall vent damper (if supplied) is in the
c)
open position.
After disconnecting power, wipe the fan blade with a moist cloth or sponge to remove any dirt
buildup. Always replace filter after cleaning in mild detergent solution. Never attempt to clean
lamp bulb while it is hot.
Use 40 watt or less lamp bulb for 120VAC fan units. Use trade #912 or #921 bulb for 12VDC
Recreational vehicle fan units.
Range Hood User Instructions
Read and Save These Instructions !
Care And Cleaning
3