9dot LiteSync Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 9dot LiteSync. 9dot LiteSync 17 pages.

(*) These are just some of the devices that can work with LiteSync. The list is very long, if you want to know if your equipment can connect to LiteSync, do not

hesitate to contact us.

Pay attention to the direction of insertion of the GigaKeys in the slots: the correct position is with the screen printing facing

upwards.

Synchronization

Many telecommunication networks require synchronization precision for their correct operation and, therefore, avoid self-

interference and reduce noise generated by the network. In this way, frequencies can also be reused and spectrally efficient.

This is possible to achieve if co-located devices are synchronized.

To synchronize the equipment, you must have a standard signal that serves as a reference to accurately determine the

corresponding data send and receive slots. This signal is known as a sync pulse and it will allow all synchronized devices to

send and receive data in the same period of time: uplink (sending data) and downlink (receiving data) so that when one

receives information, none of the others are sending.

The reference signal to generate the synchronization pulse, also known as "1PPS" or "pulse per second", can be obtained in

different ways:



Through the external GPS antenna



Through the LiteSync "Sync Input" port, connecting:

"Sync output" port of GigaSync

Cambium Networks uGPS

Cambium Networks cnPulse

Cambium Networks CMM5

With this sync pulse, the LiteSync can perfectly replicate the Cambium Networks sync mode as described in the following

table:

Method of synchronization

Cambium Sync

(*) Product sold by 9dot. It must be purchased separately.

(§) It depends on the source of synchronization that provides the pulse.

GPS antenna

The external antenna must be connected to the N-type female connector that is installed on the front of the LiteSync and

requires a good view of the sky. It does not need to be mounted at the highest point of the tower.

Products sold by 9dot

Supplied with every LiteSync, 9dot provides a compatible GPS antenna; also available separately.

9dot can also provide the coaxial cables needed to connect the antenna to the chassis which must be purchased separately.

Below are the details of these products:

Product code (*)

GS-GPSA

N2N5LMR

N2N10LMR

N2N20LMR

ACDC-48

ACDC-24

LITESYNC MANUAL

External antenna

GPSA (*)



Table 5 - Several ways to obtain Cambium Networks synchronization method

Universal GPS antenna with mounitng kit

RF Cable 400 N/M - N/M Length. 5mt

RF Cable 400 N/M - N/M Length. 10mt

RF Cable 400 N/M - N/M Length. 20mt

Standalone AC / DC CONVERTER 48V 350W power supply. Cables are not included

Standalone AC / DC CONVERTER 24V 350W power supply. Cables are not included

Table 6 - accessories supplied by 9dot

Sync Input

GigaSync

uGPS

cnPulse

 (§)



Description

CMM5



VER. 2 REV. 0