9dot SPI Manuel - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 9dot SPI. 9dot SPI 15 pages.
Imprimer la page
All these accessories are sold by 9dot and must be purchased separately. Below is the detail:
Product code (*)
Staffa Rack-B
Clip-Din
ACDC-48
ACDC-24
Physical interface
LED coding
SPI
To know the general status of the SPI, consider the LED on the front.
LED
Status
Input power supply
The technical information is detailed below:
Module
SPI
+/- 10 – 60V AC/DC
SPP
+/- 10 – 60V AC/DC
IMPORTANT NOTES:
•
In the case of two different power supplies (for example 48V and 24V), SPI will power the output device with the
highest active voltage. It is not possible to choose which voltage to power the devices in this case.
•
No conversion is applied to the input voltage and there is no isolation between the power input and the PoE output.
•
The PoE port and the LAN port are galvanically isolated from each other.
Special case -48V
The main input admits polarity inversion, that is, a negative voltage can be connected to its terminals without problems. The
redundant terminals can be used simultaneously, even with different voltages.
If you have a voltage of -48V (as is often the case in some telecommunication systems), simply connect the terminals in the
way you prefer.
SPI & SPP MANUAL
Standard 19" 2U rack adapter for max 12 CMD / ASPI / SPI / SPP. Black color
DIN Rail Clip for CMD/ASPI/SPI/SPP
Power supply standalone AC/DC CONVERTER 48V 350W. Cables are not included
Power supply standalone AC/DC CONVERTER 24V 350W Cables are not included
Table 1 - accessories supplied by 9dot
Color
Fixed blue
Table 2 – SPI general status indication LED
Input voltage
Table 3 - range of voltage, self-consumption and maximum input load
Description
Description
turned on and working
Self-consumption
< 1.5W
n.a.
12
Max load
42W
180W
VER. 2 REV. 0