Autopage C3-RS-625 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Autopage C3-RS-625. Autopage C3-RS-625 18 pages. Professional 2-way am/am remote car starter and keyless entry system with two-way serial port data link
Également pour Autopage C3-RS-625 : Manuel d'utilisation (16 pages)

Imprimer la page

turned "OFF".

TRUNK RELEASE (Additional Installation Required)

Press and hold the

control the trunk release or other electric devices.

CAR LOCATOR (ONLY IF SIREN or HORN IS INSTALLED)

Press the

locator function. The horn will chirp 6 times. The parking light will flash 12

times, for you to easily locate your car.

WARNINGS:

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep the transmitter out of children's reach.

2. Do not leave anyone in the vehicle while running on remote control.

3. Alert servicing personnel that the vehicle can be started automatically.

4. Do not start the vehicle by remote while it's in an enclosed area or

garage.

5. Always apply the parking brake and lock the vehicle as you exit the

vehicle.

6. Should the unit malfunction, disconnect the fuse until the problem is

corrected.

7. The use and operations of this system is the sole responsibility of the

operator.

8. Some areas may have local ordinances that prohibit leaving a vehicle

running on public streets.

A. TO REMOTE START THE VEHICLE:

When you want to start your vehicle,

1. Press

button once on the transmitter.

2. The parking lights will flash to indicate the remote start received the

signal.

3. The engine will start in approximately 5 seconds.

4. A few seconds after the engine is running, the parking lights will turn

on again and climate controls will activate and adjust the vehicles

interior temperature to your preset setting.

5. The vehicle will run for a 5 to 30 minute cycle and automatically shut

down.

(SAFETY START OPERATION :)

The safety start feature allows you to press the

button on transmitter for two seconds to remote

button twice when the system is armed to active car

REMOTE START OPERATION:

button twice before the