Autopage C3-RS-625 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Autopage C3-RS-625. Autopage C3-RS-625 16 pages. Professional 2-way am/am remote car starter and keyless entry system with two-way serial port data link
Également pour Autopage C3-RS-625 : Manuel d'utilisation (18 pages)

Imprimer la page

1. Valet Mode

MSVMASTER -

vehicle will remote start or remote shut down. (Programming Required)

NOTE: The Remote Start Unit w ill not start the vehicle if any one of the

following conditions exists:

1. The hood is opened.

2. The brake pedal is pressed.

3. The optional remote start enable toggle switch is in the OFF position.

4. The gear selector is in any gear other then "PARK" or "NEUTRAL"

TO TURN OFF THE REMOTE START:

When the engine is running (by remote start), if you want to stop it,

1. Press

2. Move the optional remote start enable toggle switch to OFF position.

(If installed)

3. Press the brake pedal, the vehicle will shut down and turn off the parking

light to indicate engine stopped.

TO OVERRIDE VEHICLE FROM REMOTE START CONTROL:

To operate the vehicle while it is running from the remote start:

1. Insert the ignition key and turn it to "ON" (not the start) position.

2. Press the brake pedal.

Note: If the brake pedal is pressed before the key is in the ON

position, the engine will shut down.

TEMPORARY STOP FEATURE:

This feature allows the vehicle to remain running after the key has been

removed from the ignition. This feature is useful for occasions when you

wish to exit and lock the vehicle for short periods of time, but would like to

leave the engine running and the climate control on.

1. Before turning off the engine, press the

transmitter. The parking lights will come on and the LED will flash 3

times to confirm Temporary Stop feature 'ON'

2. Turn the ignition key to OFF position. (The engine will stay running.)

3. The engine will run until the pre-programmed time elapsed or shutdown

input is received.

TIMER START: You must fully understand this feature to operate the

remote start safely. Use caution in using this feature.

This unit can be programmed to start and run the engine every 3 hours.

The engine will run for the programmed run time and then shut down.

IMPORTANT: Timer Start should be used only in open areas, NEVER start

and run the vehicle in on enclosed space such as a garage or carport.

Three hours timer start: This feature is design for an extreme cold

climate usage. The system will auto start the vehicle every 3 hours, to

prevent engine freezing and hard to start.

MSVMASTER -

button once on the transmitter.

button once on the

- http://www.msvmaster.lv