Autopage C3-RS-730 LCD Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Autopage C3-RS-730 LCD. Autopage C3-RS-730 LCD 18 pages. Professional 2-way lcd remote car starter & alarm system with built in temperature, voltage sensor and two-way serial port data link
Imprimer la page
SVMASTER -
Q. DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature)
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light wi ll remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.
R. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the
vehicle's doors when the ignition is turned "ON" and /or unlock the vehicle's doors when the ignition is
turned "OFF". (Default setting is "OFF")
S. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold
T. CHANNEL 4 TIMER CONTROL OUTPUT.
Press the transmitter
Press and hold
remote will show "CH 4" icon flash , then press
Channel 4 is user-programmable timer output. You may program the built-in timer to send a ground signal
for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on
the headlight, power window or sunroof. (Factory defaults setting at momentary output.)
U. POWER SAVER MODE (Default OFF) * See advanced user mode
Under Menu mode press
while the power save mode, the LCD remote transceiver use "0" current to save the battery power.
Press
Exit: Press any button of the LCD remote transmitter to exit "Power Save Mode".
V. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the
power is lost and then reconnected.
W. SECOND VEHICLE SECURITY OPERATION:
Your 5-button remote transmitter can be utilized to control a second vehicles security system, To program
the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
* For the standard transmitter ( II) is shift button.
Standard Transmitter
1. Prior to pushing any button on the transmitter. Press the Select II button first on the transmitter.
2. Once II button is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the second
transmitter pin code has built-in.
3. While the LED is illuminated, press any button on the remote control transmitter to control a second
vehicle security system.
4.
For LCD trans ceiver – 2
a. Press and hold
b. The text
c. Press
or
d. Press
button to select the option you would like to adjust CAR 1 or CAR 2 for further operation.
Caution: If the LCD transmitter does not function. Please insure it is set to operate car #1
SVMASTER -
button on the transmitter for two seconds to remote ly control the trunk release.
and
buttons at the same time to acti ve Channel 4 function.
F
button of LCD remote until 2 beeps sound , release and re-press
button while
"POWER SAVE " icon flash, press
button Power save OFF
nd
car operation :
F
button of LCD remote for 1 second until 2 beeps sound and then release the
will flash on the LCD screen, press
button to move up or down in the menu, find CAR SELECT on the menu.
http://www.msvmaster.lv
-
to activate channel 4 function.
button
button to enter the menu.
http://www.msvmaster.lv
-
9
or
F
button the LCD
button Power save ON,
F
button.