Autopage RF-525 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Autopage RF-525. Autopage RF-525 20 pages. Professional 2-way lcd 6 channel security system with two-way serial port data link

Imprimer la page

The starter disable relay (if installed) prevents the vehicle's starter from cranking. The

siren, horn, parking lights, and dome light will turn on to alerting of an intrusion for 30

seconds. Then it will stop and automatic reset and re-arm. If the one of sensors or

detectors still active, the alarm system will sound a maximum of 3 times of 30

second cycles.

Trunk/Hood Trigger

Doors Trigger

Warn-away Trigger

CLEAR THE FLASH ICON AND MELODY SOUND: While triggering

the alarm the LCD screen will alert user through melody sound and

flashing trigger icon, press the

will clear the flash icon and stop melody sound on the LCD screen

transceiver.

STOP THE MELODY SOUND ONLY: While triggering the alarm the

LCD screen will alert user through melody sound and flashing trigger

icon, press any button on the LCD remote transceiver to stop melody

sound only

NOISE ABATEMENT CIRCUIT: Your system has "Noise Abatement Circuit". It

prevents annoying repetitive trigger sequences due to faulty door pin switches or

environmental condition such as thunder, jackhammers airport noise, etc.

Here's how "Noise Abatement Circuit" works: The alarm triggers five times. Each time,

the same sensor or switch is triggering the alarm. "Noise Abatement Circuit" will

interpret this pattern of triggers as false alarm. After the third trigger, "Noise

Abatement Circuit" ignores, or bypasses, that sensor or switch until the other sensor

or switch is trigger. "Noise Abatement Circuit" covers doors (Hood/Trunk) differently: If

the alarm is triggered by an open door for three full cycles, the doors will be bypassed

until the trigger ceases.

SYSTEM'S TRIGGER CHECK

(For two-way transceiver operation only)

Press the transceiver

trigger's records will immediately displayed on the LCD screen.

Note: If it has no responds then you are out of range.

Shock Sensor Trigger

button first, within 3 seconds press the

Ignition Trigger

button 3 times within 3 seconds