Emerson E2 Manuel d'installation et d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Emerson E2. Emerson E2 20 pages. Clarification of the operation of alarm annunciators
Également pour Emerson E2 : Manuel de l'utilisateur (17 pages), Manuel de référence rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel de démarrage rapide (8 pages), Manuel d'instruction (12 pages), Manuel de démarrage rapide (14 pages), Manuel de démarrage rapide (9 pages), Manuel de démarrage rapide (14 pages), Manuel de démarrage rapide (9 pages), Bulletin technique (8 pages)

Introduction

One of the most important features of the E2 facility

management system is to put vital system information

at the fingertips of the service technician or store man-

ager. The FSD reports alarm information and more,

(such as temperatures, occupancy, case status, and

setpoints) and provides a centralized device for store

personnel to review information by communicating

with the E2 via Ethernet connectivity (minimum E2

firmware revision 2.65F01).

The FSD has a touch screen color display for quick

navigation and can be mounted in a separate, remote

location from the E2 controller, which enables alarms

and other relevant store information to be viewed

from where it is most convenient for the user.

The FSD can be configured to filter out notices and/or

return-to-normal alarms, and provides a quick review

of all advisories and detailed advisory information.

The FSD also receives alerts and provides annunciat-

ed alarms and alarm information directly to store and

department managers. This compact unit can be in-

stalled virtually anywhere with a standard Ethernet

connection and 120V power source. Features include:

• 6" LCD touch screen (with backlight).

• Mounting plate for recessed installation.

• Audible alarm buzzer (with silence setting) and

red alarm LED (illuminates when there is an ac-

tive advisory).

• Auxiliary relay provides a dry contact closure

that follows the alarm relay output.

• Connectivity with E2 via TCP/IP Ethernet.

• Remote software upgrading of the FSD.

• Display of up to 200 alarms.

• Display of up to 150 customizable data points.

Figure 1-1 - Facility Status Display

Introduction • 1