Emerson FB1100 Manuel de remplacement - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement pour {nom_de_la_catégorie} Emerson FB1100. Emerson FB1100 18 pages. Flow computer coin cell battery field
Également pour Emerson FB1100 : Manuel de remplacement sur le terrain de la carte de terminaison (18 pages), Manuel de remplacement sur le terrain (14 pages), Manuel de remplacement sur le terrain (20 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement sur le terrain (8 pages), Manuel de remplacement (8 pages)

Imprimer la page
Emerson FB1100 Manuel de remplacement
FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide
D301820X012
November 2020
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
DANGER
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing cover(s) in a
hazardous location could result in an explosion.

Removing/Replacing the HMI Module

UL Listed Termination Board Field Installed Accessory Kit for Use in Class I, Division 1, Groups C,
D; Class I, Division 2, Groups A, B, C, and D
To replace the termination board, you first need to remove the battery enclosure/HMI module
assembly to gain access to the termination board screws on the inside of the flow computer.
1.
2.
4
Flow Computer Termination Board Field Installed Accessory Kit Part No. 399185-01-1 for
use with UL Listed Model Series FB1100.
Flow Computer Termination Board Field Installed Accessory Kit Part No. 400216010-KIT
for use with UL Listed Model Series FB1200.
Remove the front and rear end caps. Remove the retaining clamp on the front end cap (if
present) using a 3 mm hexagonal wrench.
Components of Retaining Clamp Assembly
1
Screw
2
Retaining Clamp
3
Washer
Grasp the end cap (front or rear).