DCI Edge SERIES 4 Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DCI Edge SERIES 4. DCI Edge SERIES 4 14 pages. Dental chair
Également pour DCI Edge SERIES 4 : Manuel d'instructions d'installation (12 pages), Manuel d'instructions d'installation (11 pages), Manuel d'utilisation (8 pages)
Imprimer la page
SERIES 4 DENTAL CHAIR
Installation Instructions
CHAIR PREPARATION
POWER SWITCH COVER
Power Switch Cover: Install the power switch
cover into the opening in the truss cover near the
power switch by snapping it firmly into place.
FOOT SWITCH
Foot Switch: Unpack the foot switch and set in
position for use.
BACKREST
Rotate the backrest into position by aligning
1
the backrest bottom holes to the holes in the
link bar which extends from the upper hydraulic
assembly.
6
RETURN TO LAST POSITION
PRESET POSITION "0"
Loosen the set screw which secures the steel
2
cross pin. Align the holes of the backrest and
the back link and re-insert the cross pin. If neces-
sary, use a rubber mallet to drive the pin until it has
fully engaged both parts.
Tighten the set screw on the backrest link
3
against the pin to prohibit its movement.
PRESET POSITION "1"
FOOTPAD