DCI Edge SERIES 5 Manuel d'instructions d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DCI Edge SERIES 5. DCI Edge SERIES 5 14 pages. Side delivery system
Également pour DCI Edge SERIES 5 : Manuel d'instructions d'installation (12 pages), Manuel d'instructions d'installation (11 pages), Manuel d'utilisation (8 pages), Manuel d'instructions d'installation (13 pages), Manuel d'utilisation (19 pages)
Imprimer la page
UPHOLSTERY INSTALLATION
SEAT UPHOLSTERY
Center and place the seat upholstery on the seat
1
plate so that the clips on the bottom of the seat
upholstery drop into the slots of the Seat Plate.
Engage the clips by pushing the seat upholstery
2
toward the backrest.
Once the clips are engaged, turn the two rotating
3
catches 90 degrees to lock the seat in position.
WARNING: Failure to properly assemble
the seat upholstery to the chair could result
in injury or damage to the equipment.
BACKREST UPHOLSTERY
Attach the backrest upholstery by aligning the
1
lower keyhole features in the plastic substrate to
the flat head elevator bolts on the metal back.
Push down and slide the backest upholstery
2
toward the seat until the upper keyhole features
catch on the upper elevator bolts.
Ensure that the upper elevator bolts engage in
3
the upper keyhole slots of the backrest uphol-
stery substrate and continue to push the backrest
toward the seat until it is fully engaged on the metal
back.
HEADREST UPHOLSTERY
Remove the 6-32 screw from the back of the headrest upholstery
1
and set aside.
Align the keyholes of the headrest upholstery to the flat head bolts
2
on the headrest assembly.
Push down and slide the headrest upholstery toward the bottom
3
tip of the casting to engage the bolts in the keyhole slots.
Complete the assembly by adding the 6-32 screw to the back of
4
the headrest as shown (right).
2
1
SERIES 4 DENTAL CHAIR
Installation Instructions
7