Autoplugin RCP-B1 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Autoplugin RCP-B1. Autoplugin RCP-B1 8 pages.

Alerts receiving

If remote control unit has got inputs to obtain information about the heater

operation, they can be connected to the RCP's outputs Alert_1 and Alert_2. These

outputs are negative polarity ones. Therefore if remote control unit has got inputs of

positive polarity, it needs to apply matching circuits (with relay ex.).

Events given on the outputs Alert_1 and Alert_2 are adjusted by the settings 7.3 and

7.4 accordingly.

2) Installation procedure

· General recommendations

It is highly recommended to disconnect the battery before making connections to

the wiring. Note that the battery disconnection may reset the power windows

settings, heater settings, etc. See car's User Manual for details.

Detach climate-control's faceplate from central console

Find place inside the dashboard to install the module (mounted on double-

sided tape).

Connect the module to the wiring according to the scheme at the fig.1.

Connect the module to the receiver unit of remote control, according to the

schemes at the figures 3-9. Make task specific connections if necessary.

The module is powered and connects to the CAN-bus wires beside the

climate-control's connectors using quick splice connectors (supplied). Twist

the brown and brown-white wires of the module's connector X2 to the pair

before making connections. It is not recommended to lengthen these

module's wires.

Connect both connectors to the module (X2 should be connected first)

Connect the car's battery

Turn the ignition on to let the module get information from CAN-bus. Wait

until the LED goes off.

Test heater start from remote controller or a car's key.

Fix the module using double-sided adhesive tape

Adjust the module in Setup mode if necessary. Make notes in the

programming table of User Manual about adjustments

Attach climate-control's faceplate to its place