Dynasty Fireplaces EF44D Instructions d'installation et manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Dynasty Fireplaces EF44D. Dynasty Fireplaces EF44D 9 pages. Electric heater with remote control
Également pour Dynasty Fireplaces EF44D : Instructions d'installation et manuel d'utilisation du propriétaire de la maison (8 pages)
Imprimer la page
WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the
electric fireplace.
Installation:
NOTE ！
•
After installation, ensure that there is a space between the wall and the
fireplace insert.
Install insert:
！ ！ ！ When inserting the heating unit into mantel; Do not let the bottom of the insert touch the
mantel to avoid scratching it.
Plug the power supply cord into a wall outlet (120Vac, 60Hz). The cord has a plug as shown at A.
You should connect as shown below:
ELECTRICAL CONNECTION
A 15 AMP, 120 Volt, the unit comes standard with 6 feet (1.8 m) three wire cord and plug, exiting
from the rear of the fireplace. Plan the installation to avoid the use of an extension cord. Preferably,
the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the
circuit breaker to trip or the fuse to blow when the heater is in operation.
GROUNDING
Grounding methods
4