Dynasty Fireplaces EF45D Instructions d'installation et manuel d'utilisation du propriétaire de la maison - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation du propriétaire de la maison pour {nom_de_la_catégorie} Dynasty Fireplaces EF45D. Dynasty Fireplaces EF45D 8 pages. Electric heater with remote control
Également pour Dynasty Fireplaces EF45D : Instructions d'installation et manuel d'utilisation (9 pages)
Imprimer la page
Thermostat control
1-9 Step，room temperature is around 9-34℃. If room temperature is too high, please turn the
thermostat knob in a counter-clockwise direction; if you need to turn on the heater, you can turn the
thermostat knob in a clockwise direction.
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Unplug unit, wait 5 minutes.
3) Plug in and turn on.
● Remote control functions
Note: The fireplace's Main Power Switch must be switched ON in order for the Remote Control to
function.
Note：
● Flame, lights, fuel bed LED (including heater indication LED) cannot be turned off at the same
time;
● Down-lights cannot be turned off if there is only down-light on.
● If one of Flame, fuel bed LED and heater indication LED is not turned off; If you try to turn off
them, down-lights will be turned on at the same time.
● In order to protect the product from becoming too hot, there is an 8 second delay when turning
on the heater; also there is an 8 second delay when turning off the heater fan
Icons
Name
Power
Flame
Lower fuel
bed
Down-light
Heater
This button is used to turn the appliance ON/OFF; When
turned on, flame, lower fuel bed and the down-light will
be in working condition; When turned off, everything is
off;
This button is used to change flames;
The fire has four flames– by pressing the flame effect
button the unit will cycle through each effect.
This button is used to change the brightness of the lower
fuel bed; The fire has five steps of brightness; by
pressing this button the unit will cycle through each
effect.
This button is used to turn the down-light ON/OFF in
order to increase the brightness of the hearth;
1. 1000W: One heat indicator light illuminates; heater
will be on about 8 seconds later; Indicator light then
goes off
2. 2000W: Both indicator lights illuminate; heater will
be on about 8 seconds later; Indicator lights then
goes off
7
Function