Dynasty Fireplaces EF57US Instructions d'installation et manuel d'utilisation du propriétaire de la maison - Page 8
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation du propriétaire de la maison pour {nom_de_la_catégorie} Dynasty Fireplaces EF57US. Dynasty Fireplaces EF57US 9 pages. Electric heater with remote control
Flame button
The fire has four flame effects, by pressing the flame effect button the unit will cycle through each effect.
Heater button
Press once turns 750W power on. (Pilot lights illuminated ●○)
Press again turns 1500W power on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Unplug unit wait 5 minutes.
3) Plug in and turn on.
●
Remote control functions
Note:
The fireplace Main Power Switch must be switched ON in order for the Remote Control to function.
In order to protect the product not becoming too hot, there is 8s delay when turning on the heater; also
there is 8s delay when turning off the heater fan.
Make sure the battery are installed properly in the remote control.
The effective range of the remote control is up to 4 meters or 13 feet.
ICON
In the unlikely event of a problem occurring due to a manufacturing fault within 24 months from the date
of purchase of the appliance it will be repaired or replaced free of charge.
This warranty does not cover consumable items such as the bulbs and fuses which have a limited
lifespan.
If a problem should occur, the nature of the problem together with the date of a purchase should be
immediately reported to the retailer that the appliance was purchased from. Proof of purchase will be
required so the original invoice should be retained.
TITLE
POWER
Press once turns appliance on. Press again turns appliance off.
The fire has four flame effects, by pressing the flame effect button
FLAME
the unit will cycle through each effect.
Press once turns 750W power on. (Pilot lights illuminated ●○)
HEATER
Press again turns 1500W power on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
Digital display shows the TEMP setting 23°C (default), with 14
settings circle from "OFF", "16°C" to "28°C".
The TEMP will increase by 1°C up to 28°C when pressed each
TEMP
time.
By pressing the TEMP for 3S, the digital display can show
between °C and °F.
16-28°C corresponds to 61-82°F.
TIMER
Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, to 9H.
BACK
By pressing the downlight button the unit will cycle
LIGHT
through two effect it including OFF and ON setting.
WARRANTY
FUNCTION