Galiso OPTI-LITE Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Galiso OPTI-LITE. Galiso OPTI-LITE 18 pages. Fiber optic light guide

Imprimer la page

3.0 ASSEMBLY

Read all instructions and familiarize yourself with the safety, assembly, and operation

procedures before assembling or operating the OPTI-LITE.

3.1 Receiving and Placement

A. Select a space for the assembly and operation of the OPTI-LITE. The location of

the machine should allow adequate clearance for ventilation (see Table 3-1

below, Minimum Clearance). Make certain that the mounting feet are on the

bottom of the illuminator box. The location selected should be an area that does

not have excessive vibration. The location should also be away from any

flammable items or gases.

Rear

1.5" (37 mm)

B. Ensure the Lamp has not been dislodged from the Lamp Holder during shipment

by opening up the Lamp Replacement Door, and visually inspecting the Lamp.

The Lamp should fit symmetrically within the Lamp Holder.

C. Loosen the Locking Thumb Screws counter-clockwise to allowing the Light

Guide to be inserted into the Nosepiece.

D. Insert either end of the Light Guide into the Nosepiece on the Illuminator Box

and retighten the Locking Thumb Screws. Do not over tighten the Locking

Thumb Screws, only "hand-tight", is necessary.

E. Make sure the Intensity Control Knob is in the OFF position.

F. Plug the Power Cord into the Illuminator Box and into the appropriate voltage

wall outlet. The OPTI-LITE is now ready for operation.

If at any time, during assembly or operation, a question should arise call or contact

Galiso, Inc. at (800) 854-3789 or online at

21-11-1180

Bottom

Do not remove feet

Table 3-1, Minimum Clearance

www.galiso.com

Sides and Top

.5" (25mm)

Section 3 - 1