HighGear AltiTech 2 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HighGear AltiTech 2. HighGear AltiTech 2 20 pages. Time, compass, barometer, altimeter, chronograph, and alarm
Également pour HighGear AltiTech 2 : Manuel de référence rapide (2 pages)
Imprimer la page
ALTIMETER DATA LOG MEMORY
TABLE OF CONTENTS
CLEARING DATA INFORMATION
To Clear the information in the Altitude Data memory,
show the word HOLD flashing in the center line of the display with the words CLEAR – ALL in the top
and bottom lines respectively. Continue to hold the
with 4-dashes in the middle line indicating all data has been cleared from memory.
27
ALTIWARE SERIES
PRESS & HOLD
the
S4
key. The display will
S4
key until DATA 01 appears in the top line along
CHRONOGRAPH
TABLE OF CONTENTS
The Summit/Altitech 2 features a sophisticated digital CHRONOGRAPH timing system capable of
storing multiple timed workouts. The chronograph has a resolution of 0.01 seconds and displays both
lap time and split time on screen simultaneously.
WHAT ARE LAPS AND SPLITS
The Summit/Altitech 2 displays both LAP and SPLIT times on screen.
A LAP is a discrete period of time from when the CHRONOGRAPH
has started (Lap 1) or since the end of a previous lap. A SPLIT is the
cumulative total of all previous LAPS. Any time an individual lap is timed
it also automatically generates a corresponding split.
OPERATING THE CHRONOGRAPH
TIMING LAPS AND SPLITS
The Summit/Altitech 2 is capable of timing up to 100 LAPS and
SPLITS. These can be stored in any combination in up to 30 individual
Runs or workouts. While the CHRONOGRAPH is running, the top line
will display the time of the current lap, the middle line will show the
time for the current Split. When the timing of a Lap/Split is initiated
the bottom line will show the number of the Lap/Split for approxi-
mately 5-seconds.
summit/altitech 2
28