autoright 4 inch Cordless Manuel - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} autoright 4 inch Cordless. autoright 4 inch Cordless 16 pages. 12 volt, 4 inch cordless detailing polisher
Imprimer la pageBATTERIES AND BATTERY CHARGER
• Unplug your battery charger when you are
not charging your batteries.
• If your battery pack is hot, let it cool before
recharging.
• Do not charge batteries in direct sunlight.
• Keep your battery charger clean, do not
allow materials in the cavity of the charger,
and while UNPLUGGED wipe out the
cavity with a dry cloth, never use water or
solvents.
CHARGING THE BATTERY
Caution: Charge only 12 Volt battery packs
with your charger supplied in this AutoRight
kit, other types may burst causing damage or
personal injury.
• Plug the charger into a 120V AC power
source and insert the battery pack into
the charger receptacle pocket. Make sure
that the polarity rib in the battery pack is
aligned with the polarity slot in the charger.
There are plus and minus symbols on either
side of the battery pack that designate the
polarity of the terminals. These symbols
are on the same sides as their respective
symbols on your charger. In order for the
charger to work properly the pack must be
fully inserted into the charger receptacle
pocket. When fully inserted into the pocket
a light will come on.
• Charge your batteries only with the
HomeRight supplied battery charger.
• Use only (120 volts, 60 HZ AC only) regular
household voltage.
• Don't charge battery pack when
temperature is below 10°C (50°F) or above
40°C (104°F).
• Don't attempt to use a step-up transformer,
an engine generator or DC power
receptacle.
• Don't allow anything to cover or clog the
charger vents.
IMPORTANT SAFEGUARDS
4 INcH cOrdLESS
• Before connecting the charger to a power
source (receptacle or outlet), be certain
the voltage supplied is the same as power
requirements specified on the charger.
Mismatched voltage source can result in
serious injury to the user. When in doubt,
don't plug in the charger.
• Don't operate charger if damaged in any
way. Don't operate charger with damaged
cord. Return product to factory. To prevent
damage to cord when disconnecting
charger from power source, grip plug body
when removing it from a receptacle.
• Unplug charger from outlet before
attempting maintenance or cleaning.
• Don't substitute charger of any other type.
Doing so may result in risk of electrical
shock, fire or injury to persons.
• Keep charger free of foreign matter.
• Your new battery pack is not fully charged
when received; therefore,charging is
necessary prior to use.
• When not in use the battery pack can be
left on charger (indicated by the red light)
without any adverse effect; the batteries
cannot be "over-charged". However, if the
battery pack is not going to be used for an
extended period of time the charger should
be unplugged from its power source.
• If you need to charge more than one battery
pack, allow 15 minutes between charges.
SPECIFICATIONS OF THE AC/DC CHARGER
ADAPTER
Output voltage: 15V DC Adapter
Charging time: 5 to 7 hours
ENGLISH
5