Highland heat Kompakt Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Highland heat Kompakt. Highland heat Kompakt 20 pages. Solid fuel boiler

Imprimer la page

Kompakt

1. Introduction

1.1 General information

The boiler heat exchanger is characterized by exceptional

durability and low requirements for chimney draft. Maintenance

is simple - the control elements consist of a draft valve and

a draft regulator, which controls the air supply to the boiler.

The enlarged loading opening makes it possible to load larger

firewood. Kompakt - small but powerful boilers suitable for

burning wetter fuel.

Before connecting the boiler to the heating system, read this

manual carefully and check that all boiler components and

equipment are working properly.

Boilers are designed for heating private residential houses,

commercial and auxiliary premises. The boilers belong to the

so-called low-temperature boilers category, i.e. the average

temperature of the heat carrier cannot exceed 90 °C, and the

maximum operating pressure - 1.5 bar.

The manufacturer reserves the right to make minor changes

that do not significantly affect the quality of the combustion

process and the operation of the boiler.

1.2 Standards and regulations

The boiler must be installed and operated in compliance with

the legal requirements of the country to which it is supplied. It

must be installed in accordance with the requirements of the

maintenance and installation instructions.

Otherwise, the manufacturer assumes no responsibility and

does not guarantee repair for any defects.