AFINIA LABEL L901 Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AFINIA LABEL L901. AFINIA LABEL L901 7 pages.

5. Close Printhead Latch [6].

6. Close the Top Cover.

Confirm the missing

printhead message is

cleared from the touchscreen

Status area. Select Clear

Error if an Ink Cartridge error

message appears

7. Printer starts up and primes

ink into Printhead (this may

take a few minutes.)

8. Watch the Control Panel Touchscreen. Check

that the Printhead icon [7] in Printer image is

primed (solid color).

9. After priming completes, open the top door and

verify that the ink hoses are filled. Close the

door.

10. When ONLINE [8] appears, the Printer is ready

for use.

NOTE: If the Printhead icon continues to display

an outline or a question mark (?) try the

following procedures:

[1] Printhead icon shows an outline

(Printhead unprimed): Click "Circulate

Ink" under "Maintenance" drop-down in

Printer Toolbox. If issue persists, try the

"Install Printhead" procedure again. If this

does not clear up the issue, please contact

technical support.

[2] Printhead icon displays a question

mark (Printhead not recognized): Try the

"Install Printhead" procedure again. If the

issue continues, please contact technical

support.

NOTE: Printer may take up to 12 minutes to

set itself up during initial startup. This is

normal.

Step 7

For instructions on installing Accessories and Printer set-

up or operation, please refer to "Afinia L901 Color

Label Printer Operator Manual" in Print Driver CD

supplied with Printer.

Page 7