HIGHLY LIQUID UMR2 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIGHLY LIQUID UMR2. HIGHLY LIQUID UMR2 11 pages.

Imprimer la page
Highly Liquid

4.0 Operation

4.1 Mode

The UMR2 operates in one of two modes.
Sound Module Mode causes the host keyboard to respond to incoming MIDI notes. All input at
•
the UMR2 MIDI In port is echoed at the MIDI Out port (software thru).
MIDI Controller Mode causes MIDI notes to be sent in response to keystrokes at the host
•
keyboard's manual.
The mode of operation must be selected at boot-up using the MODE switch.

4.2 STBY/ACT LEDs

During normal operation, the UMR2 LEDs have the following functions:
STBY LED (GREEN): Power indication.
•
ACT LED (RED): Blinks briefly to indicate any incoming and outgoing MIDI messages.
•
Activity does not indicate that incoming MIDI messages match the MIDI channel or note
range established during the setup procedure.
approximately 1 second at boot time.
© 2012 Sonarcana LLC
UMR2 RevC / V1.0
The ACT LED performs a self-test of
Page 10 / 11