Highnovate BELLA Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Highnovate BELLA. Highnovate BELLA 3 pages. Remote controlled anchor
Également pour Highnovate BELLA : Mode d'emploi (2 pages), Mode d'emploi (2 pages)

Imprimer la page
SAFETY INSTRUCTIONS FOR USING "BELLA"
Max load – 1200kg
Recommended maximum working load – 400kg
Tagline – 3mm, 100m long
SAFETY CHECKS BEFORE EACH USE:
Check pins and connectors.
All parts should move freely. In case any part does not move smoothly,
it can be cleaned using wet cloth or air pressure. Let dry in the shade.
In case of severe damage, after arresting a fall, signs of wear or tear, pins
malfunction, deformation or any inability of connecting both parts, the
product should not be used immediately.
This product has several parts.
In case there is any doubt about a damage to any of the product parts, the
whole product with all its parts should be immediately put out of order and
be clearly marked in such a way that no person can use it until it is
checked by a qualified person authorized by the manufacturer.
SAFETY INSTRUCTIONS:
The product can be used only by workers at height who got proper training
according to the law, and got specific training on it
The anchor point, to which this product is to be connected to, should be a
proper anchoring point meeting the requirements for fall protection.
All means should be taken to avoid the danger of falling.
After connecting the anchor, all means should be taken to minimize the
length of a potential fall, in order to avoid dynamic loading.
The manufacturer, or people nominated by the manufacturer, can give
certification for using the product.
While using the product, all regular safety instructions for working at
height should be kept and standard PPE equipment to be used.
It is recommended to appoint a working inspector which will verify that
the rope adapter is safely locked inside the head of the product.
The product should be used only for the purpose it was designed for.
The tagline should be used only to connect the rope adapter and the head.
It is not suitable for securing equipment or workers.