DCS DishDrawer DD24SVT7 Manuel d'instructions d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DCS DishDrawer DD24SVT7. DCS DishDrawer DD24SVT7 16 pages. Dishdrawer

Imprimer la page

PULL THROUGH HOSES & MOVE INTO THE CAVITY

As you push product in, pull through hoses and

cord, ensuring they don't get kinked or twisted.

Important!

If product cannot be pushed in far enough, pull

out again and rearrange hoses and cord. Do not

use excessive force, as doing so may squash the

hoses and lead to incorrect operation.

SECURE THE DRAWER

10a

Open the

drawer halfway.

Using a flat-bladed

screwdriver, prize

the gray

rubber plug out

of the trim moulding.

Using a small Philips

screwdriver,

screw through the trim

moulding, securing the

side mounting bracket

to the cabinetry.

Do not damage the

rubber trimseal.

Replace the gray

rubber plug back into

the trim moulding

and ensure the trim

seal is facing forward.

Repeat for all

four brackets.