DYNAVOICE MAGIC FX-4 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DYNAVOICE MAGIC FX-4. DYNAVOICE MAGIC FX-4 12 pages.
Également pour DYNAVOICE MAGIC FX-4 : Manuel de l'utilisateur (6 pages)
Imprimer la page
connections on the terminal to the binding post on the amplifier and one cable from
the lower connections to the same binding post on the amplifier. Bi-Wiring can make
an audible improvement and better details in the music. Choose a cable with good
bass quality as the lower cable and a cable with much detail for the upper cable.
Bi-Amping works the same way as with Bi-Wire, except using two amplifiers for each
speaker instead of one. You need an amplifier that is designed for Bi-Amping for it
to work. See the manual for your Hi-Fi set-up's amplifier to be sure that everything is
correct.
2.3 X-change terminal (Definition and Challenger series)
Some Dynavoice speakers are equipped with an X-change terminal. This means
that you can adjust the sound to your own preferences, without having to adjust the
amplifier. To adjust the amplifier often results in a distortion of the sound unfortuna-
tely, which makes it better to adjust the X-change terminal instead. Beside X-change
connectors there is a label that shows how the sound is affected by the adjustment.
Normally, the following levels can be selected: -2dB, 0dB, +2dB, +4dB. Insert the pin
between the holes that have the value that you desire. It is easier if you have a friend
who can be involved in helping you to swap pins, while you sit in the listening posi-
tion and listen. Only you can decide what sounds best to your ears.
2.4 Bass port dampers (Included for Definition, optional for Challenger
and Magic series)
There is a possibility to adjust the bass sound on some of the speaker models, use
bass port dampers in the bass reflex tubes to get the sound you desire. The more
bass port dampers you use the less bass sound you get, which gives a more control-
led bass sound. The reverse is also true, the more pipes that are open the more bass
you will get, but it becomes less controlled.
2.5 Amplifier
Most of the Dynavoice speakers have a high sensitivity (db), which means that you
can play louder with a small amplifier. Still, the better amplifier you have – the better
sound you will get. The specified value "Max Power" on a speaker is an inexact value
since the energy of the music signal varies; neither peak nor average value is rele-
vant. Max Power of 200W means that the speaker can withstand up to 200W. It does
2