HighPoint SSD7103 Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HighPoint SSD7103. HighPoint SSD7103 15 pages. Linux ubuntu desktop 19.10
Également pour HighPoint SSD7103 : Manuel d'installation (11 pages), Manuel d'installation (11 pages), Manuel d'installation (12 pages), Manuel d'installation (12 pages), Manuel d'installation (12 pages), Manuel d'installation (13 pages), Manuel d'installation (11 pages), Manuel d'installation (11 pages), Manuel d'installation rapide (9 pages), Manuel d'installation (12 pages)

Step 3 - Creating the RAID Array

a. This procedure assumes you have already installed NVMe SSD's into the SSD7000

controller (please see Step 1- Prerequisites).

Note: Make sure your USB flash drive has been formatted using the FAT32 file systems.

b. Insert the bootable USB flash drive into the motherboard and boot the system.

c. The motherboard's BIOS post screen should display information about the NVMe

SSD's:

d. Enter the motherboard's BIOS settings, and select the UEFI: "flash drive" from

the menu:

e. At the prompt, enter the following command to change the resolution:

mode 160 53