Copper Fit STEP FX Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Copper Fit STEP FX. Copper Fit STEP FX 12 pages.

Installing/Changing the Battery

1. To install/change the battery, remove

the Copper Fit Step FX display

module from the band (see page 2).

2. Turn display module over to bottom side

then use the Philips screwdriver (included

in the package) to remove the screw in the

center of the display module (next to the

SET and RESET buttons).

3. Open the hinged door and replace the

battery with a new CR1620 Lithium cell

battery (included in the package) with the

plus side (+) facing out.

4. Insert battery underneath copper tab.

5. Close the hinged door and turn screw

clockwise to secure.

SET

RESET

NOTE: After battery has been installed or changed, the unit will

RESET

automatically prompt you to set the date and time (see Setting

Time and Date, page 5).

When the Low Battery symbol is displayed, the battery

SET

needs to be replaced.

RESET

WARNING: Button cells can be extremely harmful to small

children. Properly dispose of used cells immediately upon

removal. Keep all button cell batteries away from children.

SET

RESET

COPPER

TAB

SET

RESET

SET

RESET